Sales & Support: Request A Quote
Home ProductsDolph's

DOLPHS®BC-370,BC-350,BC-337,BC-362,BC-367,BC-379

DOLPHS®BC-370,BC-350,BC-337,BC-362,BC-367,BC-379

DOLPHS®BC-370,BC-350,BC-337,BC-362,BC-367,BC-379

Product Details:

Place of Origin: Italy
Brand Name: Dolphs
Certification: UL,SGS
Model Number: BC-370,BC-350,BC-337,BC-362,BC-367,BC-379
Contact Now
Detailed Product Description

DOLPHS ® BC - 370 - insulating paint any standing water

We are happy to announce a new solvent varnish BC - 370 is introduced, everyone is facing with EPA VOC problem, this product can provide some long-term and short-term solutions, rather than to the high cost of resin system.

In strict countries, such as California and have a high population density areas with low VOC. Typical volatile organic compounds content in solvent - based products are 4.5 pounds per gallon. We found that the pressure reached 3.5 pounds per gallon in repair facility somewhere. We've been able to achieve this goal. And the BC - 370. In meet the requirements of VOC, it also helps to avoid the high cost of dismantling and disposal of solvent based materials.

At the OEM level can significantly help states facilities allow total pounds on the basis of only so much of the emissions. Without the change of the production, the BC - 370 provides about 22% compared to reduce VOC emissions, the baptism of the most typical baking varnish. That may be an account and don't want to change from solvent technology a good answer, but there is a need to increase production and emissions of volatile organic compounds in the end.

Even DOLPHS ® insulating paint the BC - 370 every state water just temporarily solve the problem of emissions, it can be a very valuable short-term steps. This step can afford your customer enough time to fully analyze all problems into a long period of low VOC resins may need VOC under 1 pound per gallon.

In terms of performance, this product will give you the other typical dole, varnish the same results. The average viscosity can be in 250 CPS. Based on each side and drying the dielectric properties of guarantee for 4000 v/mm ASTM d115. Typical curing time is at 325 ° F or 275 ° f. 2-4 hours to 1 to 2 hours.

Packing: 5 gallons barrel

Contact Details
Yuan Xin electrician material (Hongkong) Co., Ltd.

Contact Person: Jack

Send your inquiry directly to us (0 / 3000)